#include <SeaIce.h>

Public Types
enum	salinityprofiles { NONE , CONSTANT , COXANDWEEKS , LINEARSAL , LINEARSAL2 , SINUSSAL }

Public Member Functions
	SeaIce ()

	~SeaIce ()

void	ConfigSeaIce (const SnowpackConfig &i_cfg)

SeaIce &	operator= (const SeaIce &)
	Assignement operator. More...

constexpr	SeaIce (const SeaIce &org)=default

void	calculateMeltingTemperature (ElementData &Edata)
	Calculate melting temperature as function of brine salinity. More...

void	compSalinityProfile (SnowStation &Xdata)
	Determines the salinity and associated melting temperature. More...

void	updateFreeboard (SnowStation &Xdata)
	Updates the freeboard variable (i.e., sea level with respect to ice surface) positive: sea level below ice surface negative: sea level above ice surface (flooding) . More...

double	findIceSurface (SnowStation &Xdata)
	Find snow/ice transition for sea ice simulations . More...

void	compFlooding (SnowStation &Xdata, SurfaceFluxes &Sdata)
	Apply flooding . More...

void	bottomIceFormation (SnowStation &Xdata, const CurrentMeteo &Mdata, const double &sn_dt, SurfaceFluxes &Sdata)
	Calculate ice formation and decay at the bottom. More...

void	ApplyBottomIceMassBalance (SnowStation &Xdata, const CurrentMeteo &Mdata, double dM, SurfaceFluxes &Sdata)
	Apply mass gain/loss at the bottom (dM) More...

double	getAvgBulkSalinity (const SnowStation &Xdata)
	Returns the average bulk salinity (g / kg) More...

double	getAvgBrineSalinity (const SnowStation &Xdata)
	Returns the average brine salinity (g / kg) More...

double	getTotSalinity (const SnowStation &Xdata)
	Returns the total salinity (g / m^2) More...

void	InitSeaIce (SnowStation &Xdata)
	Initializes a SnowStation object for appropriate sea ice conditions First, water and ice content is calculated, while maintaining initial bulk salinity and temperature After that, initialize pressure head consistently with the displaced ocean water. More...

void	runSeaIceModule (SnowStation &Xdata, const CurrentMeteo &Mdata, BoundCond &Bdata, const double &sn_dt, SurfaceFluxes &Sdata)
	The sea ice module This function runs the sea ice module of SNOWPACK. . More...

Static Public Member Functions
static double	compSeaIceHeatCapacity (const double &T, const double &Sal)
	Heat capacity of sea ice, for the combined system ICE + WATER (brine). More...

static double	compSeaIceThermalConductivity (const ElementData &Edata)
	Heat conduction in sea ice, for the combined system ICE + WATER (brine) More...

static double	compSeaIceLatentHeatFusion (const ElementData &Edata)
	Latent heat of melting for sea ice, for the combined system ICE + WATER (brine) More...

static double	compSeaIceLatentHeatFusion (const double &T, const double &Sal)
	Latent heat of melting for sea ice, for the combined system ICE + WATER (brine) More...

static double	calculateMeltingTemperature (const double &Sal)
	Calculate melting temperature as function of brine salinity. More...

Public Attributes
double	SeaLevel
	Sea level in domain (m) More...

double	ForcedSeaLevel
	Force sea level externally (Alpine3D) More...

double	FreeBoard
	Freeboard of sea ice (m) More...

double	IceSurface
	Interface sea ice/snow (m) More...

size_t	IceSurfaceNode
	Interface node sea ice/snow (m) More...

double	OceanHeatFlux
	Ocean heat flux (W/m^2) More...

double	BottomSalFlux

double	TopSalFlux

bool	check_initial_conditions

salinityprofiles	salinityprofile

Static Public Attributes
static const double	SeaWaterFreezingTemp = IOUtils::C_TO_K(-1.95)

static const double	SeaIceDensity = ReSolver1d::max_theta_ice * Constants::density_ice

static const double	ice_threshold = 800.

static const double	mu = 0.054

static const double	betaS = 0.824

static const double	ThicknessFirstIceLayer = 0.01

static const double	InitRg = 5.

static const double	InitRb = 2.5

static const double	OceanSalinity = 35.

static const double	InitSeaIceSalinity = 5.

static const double	InitSnowSalinity = 0.

Friends
std::iostream &	operator<< (std::iostream &os, const SeaIce &data)

std::iostream &	operator>> (std::iostream &is, SeaIce &data)

Member Enumeration Documentation

◆ salinityprofiles

enum SeaIce::salinityprofiles

Enumerator
NONE
CONSTANT
COXANDWEEKS
LINEARSAL
LINEARSAL2
SINUSSAL

Constructor & Destructor Documentation

◆ SeaIce() [1/2]

SeaIce::SeaIce ( )

◆ ~SeaIce()

SeaIce::~SeaIce ( )

◆ SeaIce() [2/2]

constexpr SeaIce::SeaIce ( const SeaIce & org )

constexprdefault

Member Function Documentation

◆ ApplyBottomIceMassBalance()

void SeaIce::ApplyBottomIceMassBalance	(	SnowStation &	Xdata,
		const CurrentMeteo &	Mdata,
		double	dM,
		SurfaceFluxes &	Sdata
	)

Apply mass gain/loss at the bottom (dM)

Version: 16.08: initial version

Parameters

Xdata
Mdata
dM	mass change from phase changes at the bottom of the sea ice (kg/m^2), positive=gain, negative=loss. Note, dM only concerns change in ice mass.
Sdata

◆ bottomIceFormation()

void SeaIce::bottomIceFormation	(	SnowStation &	Xdata,
		const CurrentMeteo &	Mdata,
		const double &	sn_dt,
		SurfaceFluxes &	Sdata
	)

Calculate ice formation and decay at the bottom.

Version: 16.08: initial version

Parameters

Xdata	SnowStation object to use in calculation
Mdata	Meteo data
sn_dt	Time step (s)
Sdata

◆ calculateMeltingTemperature() [1/2]

double SeaIce::calculateMeltingTemperature ( const double & Sal )

static

Calculate melting temperature as function of brine salinity.

Version: 17.12: initial version

Parameters

Sal	Brine salinity (PSU, which is g/kg)

◆ calculateMeltingTemperature() [2/2]

void SeaIce::calculateMeltingTemperature ( ElementData & Edata )

Calculate melting temperature as function of brine salinity.

Version: 16.08

Parameters

Edata Layer element to use in calculation

◆ compFlooding()

void SeaIce::compFlooding	(	SnowStation &	Xdata,
		SurfaceFluxes &	Sdata
	)

Apply flooding
.

Version: 16.08

Parameters

Xdata	SnowStation object to use in calculation
Sdata

◆ compSalinityProfile()

void SeaIce::compSalinityProfile ( SnowStation & Xdata )

Determines the salinity and associated melting temperature.

Parameters

Xdata SnowStation to apply the salinity profile to

◆ compSeaIceHeatCapacity()

double SeaIce::compSeaIceHeatCapacity	(	const double &	T,
		const double &	Sal
	)

static

Heat capacity of sea ice, for the combined system ICE + WATER (brine).

Version: 16.08: initial version

Parameters

T	Temperature (K)
Sal	Salinity (PSU, which is g/kg)

Returns: Heat capacity for sea ice (J / kg / K)

◆ compSeaIceLatentHeatFusion() [1/2]

double SeaIce::compSeaIceLatentHeatFusion	(	const double &	T,
		const double &	Sal
	)

static

Latent heat of melting for sea ice, for the combined system ICE + WATER (brine)

Version: 16.08: initial version

Parameters

T	Temperatur (K)
Sal	Salinity (PSU, which is g/kg)

Returns: Latent heat of fusion for sea ice (J / kg)

◆ compSeaIceLatentHeatFusion() [2/2]

double SeaIce::compSeaIceLatentHeatFusion ( const ElementData & Edata )

static

Latent heat of melting for sea ice, for the combined system ICE + WATER (brine)

Version: 16.08: initial version

Parameters

Edata

Returns: Latent heat of fusion for sea ice (J / kg)

◆ compSeaIceThermalConductivity()

double SeaIce::compSeaIceThermalConductivity ( const ElementData & Edata )

static

Heat conduction in sea ice, for the combined system ICE + WATER (brine)

Version: 16.08: initial version

Parameters

Edata

Returns: Thermal conductivity for sea ice (W K-1 m-1)

◆ ConfigSeaIce()

void SeaIce::ConfigSeaIce ( const SnowpackConfig & i_cfg )

◆ findIceSurface()

double SeaIce::findIceSurface ( SnowStation & Xdata )

Find snow/ice transition for sea ice simulations
.

Version: 16.08

Parameters

Xdata SnowStation object to use in calculation

◆ getAvgBrineSalinity()

double SeaIce::getAvgBrineSalinity ( const SnowStation & Xdata )

Returns the average brine salinity (g / kg)

Parameters

Xdata Snow cover data

◆ getAvgBulkSalinity()

double SeaIce::getAvgBulkSalinity ( const SnowStation & Xdata )

Returns the average bulk salinity (g / kg)

Parameters

Xdata Snow cover data

◆ getTotSalinity()

double SeaIce::getTotSalinity ( const SnowStation & Xdata )

Returns the total salinity (g / m^2)

Parameters

Xdata Snow cover data

◆ InitSeaIce()

void SeaIce::InitSeaIce ( SnowStation & Xdata )

Initializes a SnowStation object for appropriate sea ice conditions
First, water and ice content is calculated, while maintaining initial bulk salinity and temperature After that, initialize pressure head consistently with the displaced ocean water.

Version: 21.06: initial version

Author: Nander Wever

Parameters

Xdata The SnowStation object to initialize

◆ operator=()

SeaIce & SeaIce::operator= ( const SeaIce & source )

Assignement operator.

◆ runSeaIceModule()

void SeaIce::runSeaIceModule	(	SnowStation &	Xdata,
		const CurrentMeteo &	Mdata,
		BoundCond &	Bdata,
		const double &	sn_dt,
		SurfaceFluxes &	Sdata
	)

The sea ice module
This function runs the sea ice module of SNOWPACK.
.

Version: 16.08: initial version

Author: Nander Wever

Parameters

Xdata
Mdata
Bdata
sn_dt	SNOWPACK time step (s)
Sdata

◆ updateFreeboard()

void SeaIce::updateFreeboard ( SnowStation & Xdata )

Updates the freeboard variable (i.e., sea level with respect to ice surface)
positive: sea level below ice surface
negative: sea level above ice surface (flooding)
.

Version: 16.08

Parameters

Xdata SnowStation object to use in calculation

Friends And Related Function Documentation

◆ operator<<

std::iostream & operator<<	(	std::iostream &	os,
		const SeaIce &	data
	)

friend

◆ operator>>

std::iostream & operator>>	(	std::iostream &	is,
		SeaIce &	data
	)

friend

Member Data Documentation

◆ betaS

const double SeaIce::betaS = 0.824

static

◆ BottomSalFlux

double SeaIce::BottomSalFlux

◆ check_initial_conditions

bool SeaIce::check_initial_conditions

◆ ForcedSeaLevel

double SeaIce::ForcedSeaLevel

Force sea level externally (Alpine3D)

◆ FreeBoard

double SeaIce::FreeBoard

Freeboard of sea ice (m)

◆ ice_threshold

const double SeaIce::ice_threshold = 800.

static

◆ IceSurface

double SeaIce::IceSurface

Interface sea ice/snow (m)

◆ IceSurfaceNode

size_t SeaIce::IceSurfaceNode

Interface node sea ice/snow (m)

◆ InitRb

const double SeaIce::InitRb = 2.5

static

◆ InitRg

const double SeaIce::InitRg = 5.

static

◆ InitSeaIceSalinity

const double SeaIce::InitSeaIceSalinity = 5.

static

◆ InitSnowSalinity

const double SeaIce::InitSnowSalinity = 0.

static

◆ mu

const double SeaIce::mu = 0.054

static

◆ OceanHeatFlux

double SeaIce::OceanHeatFlux

Ocean heat flux (W/m^2)

◆ OceanSalinity

const double SeaIce::OceanSalinity = 35.

static

◆ salinityprofile

salinityprofiles SeaIce::salinityprofile

◆ SeaIceDensity

const double SeaIce::SeaIceDensity = ReSolver1d::max_theta_ice * Constants::density_ice

static

◆ SeaLevel

double SeaIce::SeaLevel

Sea level in domain (m)

◆ SeaWaterFreezingTemp

const double SeaIce::SeaWaterFreezingTemp = IOUtils::C_TO_K(-1.95)

static

◆ ThicknessFirstIceLayer

const double SeaIce::ThicknessFirstIceLayer = 0.01

static

◆ TopSalFlux

double SeaIce::TopSalFlux

The documentation for this class was generated from the following files:

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Friends

Member Enumeration Documentation

◆ salinityprofiles

Constructor & Destructor Documentation

◆ SeaIce() [1/2]

◆ ~SeaIce()

◆ SeaIce() [2/2]

Member Function Documentation

◆ ApplyBottomIceMassBalance()

◆ bottomIceFormation()

◆ calculateMeltingTemperature() [1/2]

◆ calculateMeltingTemperature() [2/2]

◆ compFlooding()

◆ compSalinityProfile()

◆ compSeaIceHeatCapacity()

◆ compSeaIceLatentHeatFusion() [1/2]

◆ compSeaIceLatentHeatFusion() [2/2]

◆ compSeaIceThermalConductivity()

◆ ConfigSeaIce()

◆ findIceSurface()

◆ getAvgBrineSalinity()

◆ getAvgBulkSalinity()

◆ getTotSalinity()

◆ InitSeaIce()

◆ operator=()

◆ runSeaIceModule()

◆ updateFreeboard()

Friends And Related Function Documentation

◆ operator<<

◆ operator>>

Member Data Documentation

◆ betaS

◆ BottomSalFlux

◆ check_initial_conditions

◆ ForcedSeaLevel

◆ FreeBoard

◆ ice_threshold

◆ IceSurface

◆ IceSurfaceNode

◆ InitRb

◆ InitRg

◆ InitSeaIceSalinity

◆ InitSnowSalinity

◆ mu

◆ OceanHeatFlux

◆ OceanSalinity

◆ salinityprofile

◆ SeaIceDensity

◆ SeaLevel

◆ SeaWaterFreezingTemp

◆ ThicknessFirstIceLayer

◆ TopSalFlux